Thursday, July 31, 2014

Tall Girl Woes - Lengthening a Too-Short Shirt

I'm tall. 6 feet, 1/4 inch, and fine with my height. Until I try shop at a non-specialty shop. Most tops are just too short for me (besides my favourite online-only-tall Old Navy tees). So last week I was going through some shirts, and came up with this simple solution to extending (haha-pun!) the use of some tops! Thought I'd share a semi-tutorial for other girls out there, or those who just like their shirts longer.


First, find two too-short tshirts that coordinate. Preferably they should be a similar width at the bottom. (My gray one was wider so I actually took the sides in a bit.)

Once you've decided which will be the bottom layer of your fooler shirt, evenly cut a 2.5" - 3.5" strip from the bottom of the tshirt. I used my rotary cutter and mat to make it really easy. You'll be using the existing hem.


On your upper shirt, remove the hem stitching. (sorry, no photo) If the hem is coverstitched, this tutorial from reallyhandmade.com might come in handy. Then pin the top edge of the under layer, raw edges together, to the other layer.


 Stitch or serge together.


Flip the under layer down and refold the hem of the tshirt, with the seam facing up, and pin through both layers.


Topstitch - I used a 4.0mm double needle to topstitch for a professional-looking result.


VoilĂ ! Your lengthened hem is finished!



8 comments:

  1. When you're a carpenter making a beautiful chest of drawers, you're not going to use a piece of plywood on the back, even though it faces the wall and nobody will ever see it. You'll know it's there, so you're going to use a beautiful piece of wood on the back.
    branded t shirts buy online

    ReplyDelete
  2. Besides having their all economic instruments and facts for future predictions, they seem helpless to make a good plan for coming crises. Queen of England asked the same question to the economist.
    Buy online t shirt

    ReplyDelete
  3. Thank you for sharing such an amazing ideas for lengthening a too-Short Shirt. Are you looking for Customized T-Shirt Printing in Coventry, visit bludog.co.uk.

    ReplyDelete
  4. I love to make handcraft by myself. Currently, I need a rotary cutter because my old one is already damage. One of my cousins suggests me to visit here and also said that here I found a different kind of rotary cutter. If you had more insight into it, I would much appreciate it. Thank you.

    ReplyDelete
  5. Great job for publishing such a nice article. Your article isn’t only useful but it is additionally really informative. Thank you because you have been willing to share information with us. Read more info about T-Shirts bedrucken

    ReplyDelete
  6. The information you've provided is useful because it provides a wealth of knowledge that will be highly beneficial to me. Thank you for sharing that. Keep up the good work. Tshirts for Men

    ReplyDelete
  7. I recently came upon your blog and wanted to express how much I liked reading your postings. I'm hoping you'll write again soon. Thank you very much for the excellent information. Cool Graphic T Shirts Online

    ReplyDelete
  8. The article you've shared here is fantastic because it provides some excellent information that will be incredibly beneficial to me. Thank you for sharing about japanese fashion. Keep up the good work.

    ReplyDelete